Data

Download climate data

Get the ClimMate hazard data as CSV files. The ready-made tables have one row for each Australian postcode, Local Government Area (LGA) or 25 km grid cell. You can also make a table for any indicator and any type of area in Australia or New Zealand. Open the files in Excel or in a different tool. Use your postcodes or coordinates to join the data to your sites.

The file list loads…

Join your site list to the data

Upload a CSV file with one row for each site. The file must have a Postcode column, or Latitude and Longitude columns, or all three. The tool adds the starter columns to each row. Your file stays in your browser and does not go to a server.

Coordinates give the 25 km grid cell of the site. A postcode gives the mean of the grid cells of the postcode, weighted by dwellings. If a site has coordinates, use them. The AASB S2 guide shows the full procedure.

Starter tables for climate reports

The starter tables have 13 hazard indicators that are important for most businesses. The indicators are for heat, cooling energy, extreme rain, dry spells, fire weather, wind, insurance premium pressure, river flood and coastal flood. Each indicator has values for six climates:

Column suffixGlobal warmingData fromUse it for
_baseAbout 0.9 °C (recent climate)1995–2014, all 23 model chainsThe present-day level
_w151.5 °CSSP2-4.5, 2021–2040, 19 model chainsThe 1.5 °C scenario at all horizons, and the 2030 horizon of the high scenario
_w171.7 °CSSP1-2.6, 2041–2060, 3 model chains (CNN)A sensitivity test of the 1.5 °C scenario at 2050 (optional)
_w181.8 °CSSP1-2.6, 2081–2100, 3 model chains (CNN)A sensitivity test of the 1.5 °C scenario at 2090 (optional)
_w242.4 °CSSP5-8.5, 2041–2060, 19 model chainsA high scenario at the 2050 horizon
_w363.6 °CSSP3-7.0, 2081–2100, 6 model chainsA high scenario at the 2090 horizon

The warming values are the IPCC AR6 best estimates for these scenarios and 20-year windows (Working Group I, Table SPM.1). The climate models in this dataset can have more or less warming than these estimates. Columns that end in _chg give the change from the baseline (median of the model chains). Columns that end in _chg_lo and _chg_hi give the 10th and 90th percentiles. For _w17 and _w18, there are only 3 model chains, so these columns give the spread of 3 runs. Three chains are too few for 1-in-20 and 1-in-100-year values (for example wettest_day_rp100). Do not use the _w17 and _w18 values of these indicators. The DCCEEW National Climate Scenario Guidance (2026) names SSP1-2.6 as an option for a 1.5 °C scenario, but its best-estimate warming is more than 1.5 °C. The AASB guide explains the scenario method.

These files have every model chain, and the number of chains is different for each pathway. The baseline has 23 chains, SSP2-4.5 and SSP5-8.5 have 19, SSP3-7.0 has 6 from 2 climate models, and SSP1-2.6 has 3 (CNN only). Different models can change the overall results. For example, SSP3-7.0 can show less change than SSP2-4.5. The maps on this site use only the 6 chains that every pathway has, so the values on the maps are not the same as the values in these files. The model_chains column gives the number of chains.

All indicators and all periods

These files have all 33 indicators for each scenario and each 20-year period. Each ZIP file has one CSV for each period, a list of variables and a README file. Use these files when the starter tables do not give sufficient detail.

The crosswalk files list the grid cells of each postcode or LGA, with the weight of each cell. Use them to do the same calculation in your own tools, or to use a different weight.

Any indicator, by area, for Australia or New Zealand

Select an indicator, a climate and a type of area. The file has one row for each area, with the baseline, the selected climate and the change (low, median and high of the model chains). Australia: postcode, SA1, SA2, SA3, SA4, LGA, state or grid cell. New Zealand: SA1, SA2, territorial authority, regional council or grid cell. Your browser makes the table from the map data.

The tool loads…

The values are the means of the map layers over the grid cells of each area, weighted by dwellings (ABS Census 2021; Stats NZ Census 2023). The map layers use the chains that the site shows, so these values can be different from the ready-made tables above, which use every chain. There is no New Zealand postcode table, because New Zealand Post licenses its postcode boundaries commercially. Method.

Other downloads on this site

PageDownloadContent
ExploreChain values (CSV)Select a location on the map. The file has the value of each model chain for each scenario and period, for one indicator.
PortfolioAAL by location, EP curves (CSV)Upload an OED location file. The files have the average annual loss of each location and the loss of the portfolio for each return period.
ExploreMap by area (CSV)The indicator on the map for each area: Australian postcode, SA1 to SA4, LGA, state, or New Zealand SA1, SA2, territorial authority, regional council, or grid cell.
InsurabilityPremium pressure by area (CSV)The modelled premium at the baseline and in the selected climate, its change, and the dwellings above each pressure threshold, for each area in Australia or New Zealand.
Flood modelYear loss table, site losses (CSV)Run the flood model on your OED file. The files have the loss of each simulated year and of each site.
Flood modelFlood loss by area (CSV)Building value and expected loss per year from river and coastal flood for each Australian area, for the selected climate and the baseline.
Bushfire modelBushfire loss by area, results by pathway (CSV)Home value and modelled bushfire loss per year for each Australian area, and the national results and return-period losses of each pathway.
Case studiesFigure data (CSV)The numbers behind the charts: case-study places, countries, Australian dwellings by premium change.
MethodsIndicator definitions (CSV)The units, type and definition of each indicator.

Sample company files

These files are for Example Cold Chain Pty Ltd, a fictional company. The AASB S2 guide uses them. Replace the sample data with the data of your company.

FileContentDownload
Site register12 sites with postcode, coordinates, values, revenue, staff and cooling electricityCSV
Key suppliers6 suppliers with postcode, coordinates, spend and alternative suppliersCSV
Company factsRevenue, assets, staff, insurance premium and time horizonsCSV
Physical risk workbookAn Excel workbook with the sample data, the risk register, the financial effects and the AASB S2 metric. You can see and change all formulas.XLSX

How we count downloads

You do not need an account. When you download a file, the site sends us the file name and the page. Cloudflare adds the approximate place of the network (country, state and city). We do not store your IP address, and we do not set cookies. If your browser sends Do Not Track or Global Privacy Control, we record the country only.

The download box asks who the data is for: an organisation and a purpose. Both are optional. Your browser keeps the answer, so it does not ask again, and the answer goes with your next downloads. To change or remove it, click Change in the download box. We use the answers only to see who uses ClimMate and to find funding to keep it free.

Licence and citation

You can use, share and change the ClimMate data under the Creative Commons Attribution 4.0 licence (CC BY 4.0). Cite the data as: ClimMate.earth, ML-downscaled CMIP6 ensemble, dataset ens-2026-10. Record the dataset name, the file name, the download date and the checksum in your evidence file.

The postcode and LGA weights use ABS data: Census 2021 Mesh Block Counts and the ASGS Edition 3 allocation files for Postal Areas 2021 and LGAs 2023 (CC BY 4.0). Postal Areas are ABS approximations of Australia Post postcodes.

The data has no bias correction and a 25 km resolution. It does not show the flood depth at one building. Read the limitations before you use the data in a report.